4 Best Magnets To Magnetize Your Tools: Buying Guide

by
Magnets to magnetize your tools

The most frustrating part while working with screws is when it falls over and rolls around some corners while you are unable to locate it.

Things become more difficult when working with small electronics or when you are trying to screw in hard-to-reach areas.

This problem could be solved entirely if your tools were magnetized. Thinking about discarding your old tools and going for brand-new magnetized tools?

Wait…..! You don’t need to spend so much. There are many simple methods by which you can easily magnetize your tools.

One of the best methods is by using a magnet. But all magnets won’t work. You will have to find out the right type of magnet for your tools.

In this article, we will provide a complete guide about the best magnets that you can go for.

Without any further delay, let’s begin………..

Related Post: 3 Easy ways to magnetize your tools

Best Magnets For Magnetizing Your Tools

There are many shapes and sizes of magnets made up of different materials. In order to magnetize your tools, you can use a solid circular magnet, a circular magnet with a hole in the center, or a bar magnet.

You can also go for magnetizers and demagnetizers which make your work much more easier. If you don’t have time to read out the whole article, just check out the below list. These have been chosen specifically based on your needs.

Disc magnet: MIN CI Strong Neodymium Disc Magnets with Holes

Bar magnet: Strong Neodymium Bar Magnets 

Circular magnet: TRYMAG Neodymium Rare Earth Magnets

Best Magnetizer and demagnetizer: Katzco Black Precision Magnetizer and Demagnetizer

Things To Consider When Choosing Magnets To Magnetize Your Tools

Finding out the best magnets to magnetize a screwdriver is really a difficult task as there are not many manufacturers that make high-quality magnets. That’s why you have to read the buying guide so that you can find the best one.

There are some of the major factors that you have to look at before buying a magnet.

  • Build Quality: It’s important that the magnet you need for magnetizing your tools should be made with high-quality material. Using any kind of magnet will not give the desired results. Therefore, always go for Neodymium Magnets.
  • Power: There are many types of magnets in the market with different amounts of power, each designed for specific use. But in order to magnetize a screwdriver you will need a magnet having at least 1/4 pound full force.
  • Rust Resistance: Neodymium magnets rust easily. So, in order to prevent them from rusting they are usually coated with Nickel. Always ensure the magnet is Nickel plated before buying.
  • Size and Shape: The properties of magnets will vary greatly according to size and shape. For magnetizing a screwdriver, both round and bar magnets will work but ensure they are not too thin are too thick.

Best Magnets To Magnetize Your Tools: Product Review

While getting a magnet, it’s important to look into all the features so that you can perform all kinds of tasks while you are working with tools.

ZDYWY Permanent Disc Rare Earth Fastener Magnets: Best Disc Magnet

Features

  • Size: D 18mm x H 5mm
  • Countersunk Hole
  • 3 Layers of coating
  • Smooth finish

The magnetic discs are made of NdFeB Material with three layers of nickel-copper-nickel. Thus providing a smooth finish and a reduction in corrosion.

The NdFeB material used to make the countersunk hole magnetic discs considerably extends the life of the magnets.

Ideal for versatile applications, especially do-it-yourself projects. Using this, you can easily magnetize your screwdrivers, wrenches, and other smaller tools as well.

MIKEDE 12 Pack Rare Earth Metal Neodymium Magnet: Strong Bar Magnets:

Features

  • Dimensions – 60mm x 10mm x 5mm
  • Power- 33 lbs per Magnet
  • Ni+Cu+Ni Triple Layer Coated
  • Multi-use
  • Shiny and rust resistant

Triple Layer Coated with Ni+Cu+Ni. The neodymium magnets bar has a high-quality coating that gives the strong magnets a beautiful, rust-resistant covering.

The strongest magnetic material is used to create these rare earth bar magnets. Strong Holding Power, with Direct Touch and Direct Pull, Holding Power is not Less Than 33 lbs.

The pull force is about 10 lbs in the vertical direction which is a good amount of force to magnetize your tools.

TRYMAG Neodymium Rare Earth Magnets: Circular Magnets

Features

The robust neodymium magnets are composed of brushed nickel silver finishing material, which has exceptional resistance to demagnetization, corrosion, and oxidation.

The small earth magnets are manufactured of premium neodymium metal with three layers of protection, making them resistant to corrosion and oxidation and well-suited to satisfy your needs.

The neodymium magnets won’t leave any scratches on your tools.

Katzco Black Precision Magnetizer and Demagnetizer

Features

  • Pack of 3
  • Negative terminal cavity
  • Positive terminal cavity
  • Compact, Lightweight design
  • Great for DIY and home improvements

The product contains 3 sets of magnetizer and demagnetizer which are very much precise and you can magnetized and demagnetize your tool as an when you want.

The positive terminal cavity will help you to magnetize your tools and the negative terminal will allow for demagnetization.

This tool’s compact, lightweight design allows it to be stored in a pocket, toolbox, or other location.

Conclusion

Here we have highlighted all the key factors you need to look at while selecting a magnet for your tools. Also, you will get the list of required tools and materials as per your budget.

The stronger the magnet, the better the magnetic property will be. So, we recommend you to read this full detailed guide.

The magnets which we have discussed in this article are all great choices for anyone who wants to buy the best magnet to magnetize their tools.

We hope that our buying guide has helped you to find the best magnet.

Let us know in the comments…

FAQ: Best Magnets to Magnetize Your Tools?

Most people these days opt to buy magnetic screwdriver by paying more price instead of magnetizing the screwdriver they already have with them.

It is an easy and cost-efficient process to magnetize your tools. However, there are many questions in the minds of people related to this, here we are answering some important questions.

1. Why rubbing a magnet across a screwdriver magnetizes it?

Ans: All magnets have north and south poles and the electrons present on them align in the same direction giving them their magnetic energy.
But the electrons in any other metal objects are arranged in different directions. Rubbing the magnet against your screwdriver causes the electrons in the object to line up and create a weak magnetic field, which then behaves like a magnet.

2. Which metal cannot be magnetized?

Ans: The metals which are notattracted to magnetic fields such as Aluminum, Brass, Copper, Gold, Silver, Titanium, Tungsten, and Lead cannot be magnetized.

3. Which handtools can be magnetized easily using a magnet?

Ans: The most common and easy tool that can be magnetized anytime is the screwdriver.
Apart from that, you can also magnetize your drill bits, wrenches and pliers. All you need is a stronger magnet.

4. How long will the screwdriver stay magnetized?

Ans: If you have magnetized your screwdriver using a strong magnet, it will last for at least two to three months.
But if accidentally drop your magnetic tools, they will lose their magnetic property more sooner.

Leave a Comment